- General
-
Order number D13024 Type code CP-AM-LABEL-V2 Series CP Systems Categories Application module
- Description
-
The module prints a self-adhesive label and applies it to the workpiece.
The printer is preloaded with three templates, one of which is selected according to the order data. All three templates accept additional parameters which are also configurable in the order. The templates can be modified.
-
Attribute Value Operating voltage 24 V DC (application module)
100-240 V AC (printer)Operating pressure 6 bar Dimensions (L x B x H) 434 mm x 198 mm x 766 mm Weight 11 kg Interfaces Syslink -
Application module interface (Syslink or analog terminal)
Description Reference Datatype Address
CP LabAddress
CP FactoryInputs TRUE = X-axis in label pick-up position +PH-BG1 Bool %I0.0 %I2.0 TRUE = X-axis in rear end position +PH-BG2 Bool %I0.1 %I2.1 TRUE = Z-axis in upper end position +PH-BG3 Bool %I0.2 %I2.2 TRUE = Z-axis in lower end position +PH-BG4 Bool %I0.3 %I2.3 TRUE = Work piece present +PH-BG5 Bool %I0.4 %I2.4 TRUE = Vacuum created +PH-BP6 Bool %I0.5 %I2.5 Outputs Move X-axis (FALSE = to rear end position, TRUE = to label pick-up position) +PH-MB1 Bool %Q0.0 %Q2.0 TRUE = Move Z-axis up +PH-MB3 Bool %Q0.2 %Q2.2 TRUE = Move Z-axis down +PH-MB4 Bool %Q0.3 %Q2.3 TRUE = Switch on vacuum +PH-MB6 Bool %Q0.5 %Q2.5 TRUE = Switch on blower +PH-MB7 Bool %Q0.6 %Q2.6 TRUE = Switch on label cutter +PH-TM8 Bool %Q0.7 %Q2.7 -
-
