To update Robotino's operating system and firmware, please do the following:

  1. Save all important programs from your Robotino.
  2. Download the current image of the operating system and firmware: Robotino 4 Image
  3. Copy the image (.fsa file) to the /boot directory on the USB stick supplied with your Robotino. If necessary, delete other OS images in this folder if you need space.
  4. Plug the USB stick into a free Robotino USB port.
  5. Connect a monitor to the HDMI output and a keyboard to a free USB jack from Robotino.
  6. Start Robotino while pressing the F7 key while booting.
  7. In the "Please select boot device" dialog, use the arrow keys to select the USB stick and press Enter.
  8. Confirm booting from the USB stick by pressing Enter.
  9. After booting, enter the number of the new image on the USB stick and press Enter. Then confirm the installation with the 'y' key and Enter.
  10. Robotino automatically shuts off at the end of the installation.
  11. Please note that after updating the operating system, the Network Settings are changed. After installation Robotino will start an access point with the network name Robotino4.004.XXX and the password robotino.
  12. Optional: Connect to Robotino via WLAN with your PC / notebook and open it Webinterface . On the page, enter Network Finally, in the wlan0 section, enter your individual network settings.